Cleanroom Sticky Rollers & Tacky Rollers

SKESD manufactures and supplies cleanroom sticky rollers, tacky rollers and compatible roller handles for surface particle removal in cleanrooms, electronics manufacturing and controlled production environments.

Our sticky roller range includes:

• PE adhesive sticky rollers for manual surface cleaning
• PP adhesive sticky rollers for cleaning machines and production lines
• Washable silicone sticky rollers for reusable precision-surface cleaning
• Standard sticky roller handles
• Extendable sticky roller handles

Each roller type uses a different cleaning mechanism and is intended for a different operating method.

Choose the roller according to the surface, cleaning method, working width, tack requirement and equipment configuration rather than selecting only by material.

Sticky Roller Selection Guide

Which Sticky Roller Should I Choose?

Choose SK-RL if You Need:

• Manual surface cleaning
• Disposable adhesive film
• 4–12 inch roller widths
• A roller used with handheld or compatible extension handles
• General workbench, equipment-panel or controlled-area cleaning

Choose SK-RMP if You Need:

• Installation in a cleaning machine
• Wide-format cleaning
• 45–170 cm roller widths
• A 3-inch machine core
• PCB, FPC, LCD, film or production-line surface cleaning

Choose SK-WLA if You Need:

• A washable roller
• Reusable PDMS silicone construction
• Multiple tack levels
• 4–24 inch widths
• Precision-surface particle removal
• DCR-pad-assisted routine cleaning

Choose SK-RL-H if You Need:

• Standard handheld operation
• A handle for compatible 4–12 inch rollers
• Direct-reach cleaning

Choose SK-RHL if You Need:

• Additional working reach
• Floor or wall cleaning
• Higher or difficult-to-reach surfaces
• An extendable rod up to approximately 1.2 m

PE vs PP vs Silicone Sticky Rollers

PE adhesive sticky rollers are disposable rollers made with PE film and water-based acrylic adhesive. They are suitable for general cleanroom surface cleaning, PCB workbenches and equipment panels.

PP sticky rollers are often selected for machine use and wide-area particle removal in PCB, FPC, LCD and precision printing processes.

Silicone sticky rollers are washable and reusable. They are suitable for sensitive surfaces such as PCB, LCD, SMT components, stainless steel sheets and films where residue control and surface protection are important.

How Sticky Rollers Work

Different sticky roller types use different particle-removal mechanisms.

PE Manual Roller

Production Surface → Adhesive PE Film → Peel Away Used Film

The PE adhesive film contacts the surface and picks up loose dust, lint and particles.

When contaminated, the used section is peeled away.

PP Machine Roller

Product Surface → PP Adhesive Roll → Advance / Remove Used Film

The material passes through the cleaning machine and directly contacts the PP adhesive roller.

Contaminated adhesive film is advanced or removed according to the machine configuration.

Washable Silicone Roller

Product Surface → PDMS Silicone Roller → DCR Pad / Wash → Reuse

The silicone surface picks up loose particles.

Collected contamination can then be transferred to a DCR pad before the roller returns to service.

Silicone Sticky Rollers and DCR Pads

DCR pads are commonly used together with reusable silicone sticky rollers.

The typical cleaning sequence is:

Production Surface → Silicone Sticky Roller → DCR Pad

The silicone roller first picks up loose contamination from the production surface.

The roller is then passed across a compatible DCR pad so that particles transfer from the silicone surface to the adhesive pad.

This allows the silicone roller to continue working without washing after every cleaning pass.

When deeper cleaning is required, the roller can be washed according to the approved maintenance procedure.

Sticky Rollers vs. Sticky Mats

Sticky rollers and sticky mats serve different contamination-control functions.

Sticky Rollers

Used for direct surface particle removal, including:

• Workbenches
• Equipment panels
• PCB / FPC surfaces
• LCD / display materials
• Film
• Production surfaces

Sticky Mats

Used primarily at entrances and transition points to capture loose contamination from:

• Footwear
• Cart wheels
• Trolley casters

For entrance contamination control, view our Cleanroom Sticky Mats.

FAQ

What is the difference between PE, PP and silicone sticky rollers?

PE rollers are mainly used as disposable manual adhesive rollers.

PP rollers in the SKESD range are designed primarily for wide-format machine cleaning.

Silicone rollers use a washable reusable PDMS surface for compatible precision-surface cleaning.

What is the difference between a disposable and washable sticky roller?

A disposable roller uses adhesive film that is peeled, advanced or replaced after contamination.

A washable silicone roller uses a reusable tacky surface that can be cleaned and returned to use.

Do silicone sticky rollers need DCR pads?

A DCR pad can be used to transfer collected contamination from the silicone roller during routine cleaning.

What is the difference between SK-RL-H and SK-RHL?

SK-RL-H is a standard reusable handle for compatible 4–12 inch rollers.

SK-RHL is an extendable handle that starts at approximately 70 cm and extends to approximately 1.2 m.

Send us your required material, width, tackiness level, roll length, handle type and application for a quote.

Please enable JavaScript in your browser to complete this form.

Name *

First

Last

Email *

Any comments or questions?

Submit

We have a large selection of cleanroom products, including cleanroom sticky rolllers. We also have cleanroom wipes, cleanroom paper, cleanroom swabs, and shoe cover dispensers. If you can’t find what you’re looking for, please use the search box above or contact us via email at info@skesd.com and we will be happy to help you!